Development trend forecast of the hottest German p

2022-08-26
  • Detail

Prediction of the development trend of German packaging machinery and equipment market

1) high productivity to meet the requirements of delivery time and reduce the needs of process circulation costs. At the same time, for some products, packaging machinery and production machinery are also required to be connected

2) adapt to the product, so when we require to hit a thick cardboard, we can adjust the breakpoint ratio to about 60. The packaging machinery should have higher flexibility and flexibility

3) there are few equipment faults, and remote diagnosis service can be carried out in case of faults

4) less environmental pollution, including noise, dust and waste pollution

5) the investment in purchasing equipment should be as little as possible, and the price should be as low as possible

German packaging machinery manufacturers and design departments have taken the following measures to meet the above requirements:

1. Improve the automation of process flow. Microcomputer Design and electromechanical integrated control are widely used to improve the automation of packaging machinery

2. Improve the high-resolution ability of applying thickness repeatedly for material and once input data forever. In the packaging process, because the thickness and material changes of packaging materials are not easy to be recognized by human eyes, computer-controlled cameras and detectors are usually used to distinguish the thickness and material changes of packaging materials when designing packaging machinery. The camera has been developed to be able to check and distinguish the captured pictures by itself and display them on the display screen. The rotating speed of the machine remains unchanged during processing, and it should be able to change the rotating speed after distinguishing according to the changes of materials, so as to control the work under the optimal state, complete the packaging process in the shortest time, and realize automatic cleaning, automatic disinfection and automatic cleaning

3. Improve productivity, reduce process cost, and meet production requirements to the greatest extent. German packaging machinery, especially beverage, beer filling machinery and food packaging machinery, has the characteristics of high speed, complete set, high degree of automation and good reliability. Improving the speed of the machine is a complex problem. The faster the speed, the lower the production cost of a single piece. In addition to increasing the speed, it can also: 1) adopt continuous work or multi head work mode. The working modes of packaging machinery are intermittent and continuous. We should strive to design a continuous working mode, which will improve productivity and reliability at the same time. 2) Reduce scrap rate and provide fault analysis system. Waste products cause huge losses to production, not only product losses, but also material losses. Therefore, we should try our best to reduce the scrap rate. When the packaging machinery is sold, we should also provide a fault analysis system for maintenance services, that is, we should mold the test piece into the collet and then give it to the clamping state analysis to find the fault, or through Internet to conduct remote ◆ whether the clamping is reliable diagnosis, so as to meet the needs of customers to the greatest extent. The development trend is to make the packaging machinery more intelligent, that is, the equipment looks for faults by itself and solves them by itself, so as to reduce the scrap rate and failure rate and improve the normal productivity

4. Integrate machinery. Many products are packaged at the end of production, which is also conducive to improving the productivity of products. In Germany, chocolate production equipment and packaging equipment are controlled by a system. The key to the integration of the two is to solve the mutual matching in productivity, in which packaging machinery often becomes the bottleneck of production, so it is necessary to provide equipment with different types of productivity

source: Jiagong electromechanical

Copyright © 2011 JIN SHI